Hoppy vs GetPublicIP vs TunnelNet
All three rent you a public IPv4 address that follows a machine you own, over an encrypted tunnel, so people can reach it even when your internet provider puts you behind CGNAT. They differ in price, where the servers are, how much traffic is included, and what happens to your outgoing traffic. Every fact about the other two comes from their own pages, read on November 18, 2026, and is linked so you can check it.
The short answer
- Lowest monthly price: Hoppy’s Standard plan, $8 a month (hoppy.network/pricing).
- The most regions to pick from: GetPublicIP lists North America, Europe, South America, Australia, Asia and Africa (getpublicip.com).
- Your outgoing traffic leaving from the same address, on a phone as well as a computer: TunnelNet Full, $20 a month. On Linux and iPhone today.
- An address from a block whose owner you can look up: TunnelNet addresses come from our own 23.187.152.0/24, announced from AS396500. Neither of the other two says on its pages which block or network its addresses come from.
Side by side
On a phone, swipe the table sideways to see all three.
| Hoppy | GetPublicIP | TunnelNet | |
|---|---|---|---|
| Price | Standard $8/mo; Plus $16/mo (source) | $8.99/mo per IP address (source) | IP $10/mo; Full $20/mo (pricing) |
| Addresses | 1 IPv4 and a /56 of IPv6 on both plans (source) | “Dedicated public IPv4 & IPv6 addresses” (source) | 1 IPv4 of your own and a /56 of IPv6 |
| Traffic included | Standard 1 TB a month at 100/100 Mbps; Plus 3 TB at 750/750 Mbps (source). Past the limit, speed drops to 64–256 kbps (FAQ) | Not stated | 1 TB a month on IP and Full. Past that, speed drops to 10 Mbit/s until the 1st; no cut-off and no overage charge. An extra 1 TB is $15 (terms) |
| How it connects | WireGuard (source) | “Encrypted VPN tunnels”; Linux, Windows and macOS (source) | WireGuard, set up by one installer: Linux, WSL, Windows, a Mac with Apple Silicon, or an iPhone |
| Ports | “Do you block ports on the tunnels?” “Nope” (FAQ) | A built-in firewall: map ports and limit a port to one source address (source) | SSH open by default, everything else closed until you open it; rules enforced before traffic reaches you. Outgoing port 25 blocked |
| Outgoing traffic | Not stated | Not stated | IP: leaves through your own provider. Full: leaves from your address (Linux and iPhone today) |
| Where the servers are | Not stated | Six regions, no cities named (source) | Chicago and Newark, US |
| Billing | Monthly or yearly prices (source); renews automatically until you cancel (terms) | “No contracts • Cancel anytime” (source) | Monthly, renews until you cancel; cancel at any time from your account |
Checked November 18, 2026 on each company’s own pages, linked in the table. “Not stated” means we could not find it on that company’s own pages on November 18, 2026, not that they lack it. Prices and plans change; their pages are the place to check. We also meant to include SteadIP, but its site did not load on the day we checked, so we have left it out rather than repeat what others say about it.
When Hoppy is the better pick
If price matters most and 1 TB a month is plenty, Hoppy’s $8 Standard plan costs less than ours, with the same 1 TB. If you move a lot of data fast, its Plus plan states 750/750 Mbps and 3 TB for $16 (hoppy.network/pricing). And if you want every port open with no filtering at all, its FAQ says it blocks none.
When GetPublicIP is the better pick
If you and the people who connect to you are outside the US, GetPublicIP lists regions on six continents, and the shorter distance will show up as a lower ping. Our hubs are only in Chicago and Newark. It also lets you lock a port to a single source address from its own firewall (getpublicip.com).
When TunnelNet is the better pick
- A vendor has to allow-list the address you connect from, not just the one they call you on. With TunnelNet Full your outgoing traffic leaves from your own address too.
- You want it on an iPhone, not only on a computer.
- You want to know whose address it is. Ours come from 23.187.152.0/24, announced by BGP from AS396500, a network we run. Anyone can look that up.
- You want two cities behind it. We announce your address from Chicago and Newark. When a hub failed completely in our own test on September 16, 2026, a busy tunnel was reachable again in about 25 seconds. The uptime page shows the measured record.
- You want it closed until you open it. Only SSH answers at first. You open each other port yourself, and blocked traffic is dropped before it reaches your machine.
What TunnelNet does not do
- No servers outside the US. Chicago and Newark only, for now.
- No protection from flood attacks (DDoS).
- Outgoing port 25 is blocked, so you cannot send mail from the address.
- Android is not supported yet. On Windows and Mac you get the address, so people can reach your computer, but your outgoing traffic still leaves through your own provider, even on Full.
- There is no SLA. We publish the measured availability instead.
Which one?
All three solve the same problem: being reachable when your provider will not give you an address. Pick on what you need most: price, a region near you, or your outgoing traffic and phone on the same address. If that last one is you, here are our plans and what each one includes.