A static IP without paying for business internet
You want an address that does not change, so people can reach something you run at home: a small website, a camera, a game server, a remote desktop. Many internet providers will give you one, but usually as part of a business plan. Business plans often cost more than home plans, and the static address is part of why. This page explains another way to get a fixed public address, and where that way is the wrong choice.
The short version
TunnelNet IP is a real public IPv4 address, $10 a month, that is routed to a machine you already own. Your machine keeps a tunnel open to us, so it works behind a home router, behind a provider that shares one address between many customers (CGNAT), and without any port forwarding. You keep your current home internet.
What business plans cost
We keep a separate write-up of published prices for a Comcast Business static IP, with the sources and dates, in How much does a Comcast Business static IP cost?. In short, the published rates put a block of static addresses on top of a business internet plan, and the sum is usually well above a home plan. We do not quote competitor prices here, because plans and promotions change. Check your own provider's current price before you compare.
What you get with TunnelNet IP
- A dedicated IPv4 address from our own block, 23.187.152.0/24, announced from our own AS396500. You can look the owner up in public records.
- An IPv6 /56 with it, so containers and virtual machines behind your machine can have their own addresses.
- Inbound connections reach your machine at that address. SSH is open by default; every other port stays closed until you open it with
tnet ports allow. - It works from behind NAT or CGNAT. Your machine dials out to us and we route the address down that tunnel, so nothing needs to be forwarded on your router.
- One installer per system: Linux, WSL, macOS on Apple Silicon, Windows, or an iPhone.
- 1 TB of traffic a month is included. After that your speed drops to 10 Mbit/s until the 1st of the next month. You are never cut off and never charged a surprise. An extra 1 TB is $15.
What it does not do
- It carries inbound traffic only. Your own browsing and downloads still leave through your home line. If a service has to see your fixed address on the traffic you send, you need TunnelNet Full ($20 a month). Today Full sends your traffic out from your own address on Linux and on an iPhone.
- It is not your internet provider's address. The address belongs to TunnelNet and follows your machine. If you leave us, you give it back.
- Outgoing mail on port 25 is blocked. If you want to run a mail server, read our mail server guide first.
- There is no uptime guarantee yet. We began measuring from outside our own network on 21 August 2026 and will not promise a number before we have six months of history. When a hub fails completely, we measured about 25 seconds before the address was reachable again. One kind of failure is not covered at all: if a hub stays up but stops forwarding traffic, there is no automatic failover (see the pricing page). Every incident goes on our public uptime page.
When business internet is still the better choice
- You need far more than 1 TB a month through the address.
- You need a written service level from your provider.
- You need your whole office to have its own addresses on its own uplink. For one fixed address for a whole site, look at TunnelNet Business instead.
How to try it
- Choose the IP plan on the pricing page and install on the machine that should be reachable.
- Check what the machine now has with
sudo tnet status. - Open only what you need, for example
sudo tnet ports allow tcp 80. Close it again withsudo tnet ports deny 80.
Not sure you are behind CGNAT at all? Our tested three-step check takes about two minutes.