TunnelNet Guides

Keep the same public IP when you switch internet providers

2026-11-19

When you change internet provider, the address your connection has changes too. Anything that points at the old address stops working: a camera you reach from your phone, a website at home, a remote desktop, a partner who has you on a list. This page explains why that happens and how an address that does not belong to your provider avoids it.

Why the address changes

The public address of a home internet line is usually assigned by the provider and belongs to the provider. If you leave, you hand it back. Even without switching, many providers change it from time to time. With CGNAT you may not have an address of your own at all, because it is shared with other customers.

An address that belongs to the tunnel

With TunnelNet, the address lives on our network and is routed to your machine through a tunnel. Your machine opens the tunnel outward, over whatever internet line it has. So the address is not tied to the line. If the line changes, the machine reconnects the tunnel over the new line, and the same address answers again.

What we measured

We have not moved a customer between two providers in a test, so we cannot give you a number for a full provider change. What we did test is the closest thing: a router with two internet lines where the main line is cut and the router falls back to the second one. In our lab, the address came back on the backup line in these times:

  • MikroTik router: 2 to 3 seconds.
  • OPNsense router: 4 to 6 seconds, in 5 of 5 cuts.
  • A test gateway set up like a UniFi one: 2.3 seconds, in 3 runs.

These are lab numbers, not a promise. Your time depends on your router, your lines and how quickly the router notices that a line is down. Going back to the main line lost nothing in our lab. The story, with the setup, is in Starlink or 5G as a backup line, without losing your address.

What this means when you switch

  1. Install TunnelNet on the machine that should stay reachable. It gets an address.
  2. Switch your internet provider as you planned.
  3. When the new line is up, the machine reconnects the tunnel and the address answers again. Check from outside with a connection test from another network.

Limits

  • It is one address per machine on the $10 TunnelNet IP plan. It follows the machine, not the house.
  • If the machine is off or has no internet, the address cannot answer.
  • Using both lines at the same time on one address is coming soon. Today the address uses one working line.
  • If our own hub stays up but stops forwarding traffic, there is no automatic failover, because your lines are fine. We record such events on our public uptime page.
  • 1 TB a month is included, then your speed drops to 10 Mbit/s until the 1st. An extra 1 TB is $15. There is no uptime guarantee yet.

Plans and prices are on the pricing page.